0 items
Reusable Drive Shanks and Plastic Bushings
Tanis provides Drive Shanks including Drill Press Shanks, Air Motor Shanks and Plastic Bushings in various diameters and sizes for use with our power brushes. Our Drill Press Shanks are for use in portable tools and drill presses with 1/4” chuck adaptability with accommodation for 1/4”, 3/8” or 1/2” arbor holes. Designed for 20,000 RPM, but M.S.F.S. of the specific brush should be observed for safe operation.
Our Air Motor Shanks have the same general specifications as our Drill Press Shanks, but are for use in air motors and flexible shafts. They accept single or multiple brushes.
Plastic Bushings are designed for economical, one-time use to match the brush inside diameter with your mounting shaft. We offer a range of inner and outer diameters. For safety, use only one per brush. Flange eliminates side movement.
| SKU | Shank Diameter | Arbor Hole | Overall Length | For Arbor Width To | |
|---|---|---|---|---|---|
| 10025 | 1/4" | 1/4" | 2-1/2" | 5/8" | |
| 10026 | 1/4" | 3/8" | 2-1/2" | 7/8" | |
| 10027 | 1/4" | 1/2" | 2-1/2" | 3/8" | |
| 10030 | 1/4" | 1/2" | 1-7/8" | 3/8" | |
| 10031 | 1/4" | 3/8" | 1-5/8" | 3/8" | |
| 10032 | 3/16" | 1/4" | 1-3/4" | 3/4" | |
| 10033 | 1/4" | 5/8" | 1-7/8" | 3/8" | |
| 10035 | 3/8" | 1/4" | |||
| 10036 | 1/2" | 1/4" | |||
| 10037 | 1/2" | 3/8" | |||
| 10038 | 5/8" | 1/2" |
Other Power Brushes
-
Abrasive Nylon Copper Center Wheel Brush
-
Abrasive Nylon End Brush
-
Circular Flared End Brush
-
Conflare Brush
-
Copper Center Crimped Wire Wheel Brush
-
Copper Center Non-Metallic Wheel Brush
-
Miniature Cup Brush
-
Miniature End Brush
-
Miniature Wheel Brush
-
Radial End Brush
-
Reusable Drive Shanks and Plastic Bushings
-
Square Trim Brush
-
Wire End Brush
